STANDARD USER SETUP/EDIT FORM
(Submission Form)


space space space
space space
Submit Your Family Tree

  User Code
  Password
space
Both required; 3-16 characters (letters, numbers, hyphen, or underscore only), no spaces.

 
We recommend standard if this is your first submission. You can use the Advanced setup later to modify your options.


Terms and Definitions

Download
WorldConnect permits you to download portions of another researcher's family tree, if the submitter allows it. Downloading a file copies a portion of the family tree to your computer, so you can incorporate it into your personal files. As with any other source, be sure to verify the accuracy of the information.

Footer
If you are submitting a family tree, you have the option of adding a footer to your file. Many submitters use this area, which appears near the bottom of each page, for closing comments.

GEDCOM
GEDCOM is an acronym for GEnealogical Data COMmunications. Within the WorldConnect Project, "GEDCOM" indicates an individual family tree or file. A more detailed explanation of what a GEDCOM is, and how it is used within the WorldConnect Project, is available here.

GEDCOM Tags
When you create a GEDCOM file, the fields containing information in your genealogy file (birth, marriage, baptism, etc.) are mapped to the appropriate GEDCOM tags (e.g., BIRT, MARR, BAPM). A listing of the most common tags and their definitions is available here.

Header
If you are submitting a family tree, you have the option of adding a header to your file. Many submitters use this area, which appears near the top of each page, to add supplemental information for those accessing the file, including: postal addresses, homepage URLs (Web addresses), page counters, cautions that some data has not been verified, and so on. A header is not the same as a title, which appears directly under the RootsWeb masthead.

Post-em Note
A Post-em Note enables you to help fill in a missing piece of information in an existing file. It is the electronic equivalent of a sticky note. You can attach your e-mail address, a link to another Web address, or other information to the record of any individual in WorldConnect. For a more detailed explanation of what Post-em Notes are, and how to use them, click here.

Title
The title of a WorldConnect database will appear in bold letters directly under the RootsWeb masthead. The title is not the same as a header. A header, if used, will appear in a much smaller type directly above the individual entries, between the blue lines.

Upload
When you upload your family tree, you are transferring a copy of your file to the WorldConnect Project. It does not alter or remove the family tree on your computer.

URL
URL is an acronym for Uniform Resource Locator. In layman's terms, it is an address for a document or resource on the Internet. The address of your family tree will include your user code(s).

User Code
The person submitting a family tree chooses a unique user code to identify each family tree submitted. The user code appears in WorldConnect's search results, and becomes part of the URL (address) of the family tree.

More Terms and Definitions



Related FAQs:

Creating a GEDCOM file
Submitting Your Family Tree
Advanced Submission Form



space
space
column We highly recommend that you choose the standard setup option the first time you submit a family tree to the WorldConnect Project. You will be able to use the advanced setup form to edit your file later on if you wish.

Preliminary steps
  • Create a GEDCOM format of your family tree prior to beginning the submission process.

  • Complete the submission form in the side panel of this page, or follow the links on the main WorldConnect page or the main RootsWeb.com page.

  • You may submit as many family trees as you wish; however, each one must have a unique user code.

Completing the user setup/edit form
[View standard setup/edit form]

You can change your options at any time, without having to resubmit your family tree. Leave the location field blank if you are not uploading a new or revised GEDCOM file.

Section one: owner information
[View this segment of the form]

The information you entered on the preliminary submission pages will appear here automatically. You may update or modify the information, but you cannot leave these fields blank.

Section two: display options
[View this segment of the form]
[View placement and examples of title, header, footer]

"Title" is the only required field. It will appear on every page within your family tree. The header and footer areas appear in smaller print.

If you want the WorldConnect Project to change your surnames to all uppercase (capital) letters, select "yes" on that option.  "No" indicates that you want the surnames to remain in the format you entered them in your program: all uppercase, mixed case, or even all lowercase letters.

Section three: GEDCOM download options
[View this segment of the form]

You determine if others can download your file. If you leave the setting at "no," other researchers will not be able to download any part of your file; "yes" will allow them to download a maximum of six generations from any individual in your family tree. Only you, the submitter, can download the entire file.

Section four: upload options
[View this segment of the form]

The last section of this form identifies where your file is located on your computer, and defines your display preferences.

Clicking on the "browse" button is the easiest method to enter the location of the file on your computer. Older browsers may not display the "browse" button, but upgrading your browser software should make it visible. If you are uploading from a disk or CD, be sure it is inserted in your computer. You will not be able to use multiple disks for the same family tree. If you are not uploading a new or revised file, the location should be left blank.

The remaining options determine how you want the WorldConnect Project to display individuals, especially those still living. You can choose to clean or remove the records of living individuals from display. (The records will still be in your file. Only what is displayed on the Internet is altered.) Living in this case is defined as anyone in your family tree born (or christened) in 1930 or later that does not have a death or burial year included in the proper field of your GEDCOM, unless you change the default settings (default year currently is 1930).The year 1930 was used as the default setting because the 1930 U.S. census has been released as public information. You can change the default to any year prior to 1930 if you wish. For example, if you have a person in your file who was born in 1921 and is still living, you can change the default to 1920 so that their full name will not be displayed. When there are no birth or christening dates, the WorldConnect program attempts to approximate the year of birth from other information in the GEDCOM file.

  • Clean means the entries for living individuals will be displayed in WorldConnect but the given names will be replaced with the word "living." The advanced user setup/edit form gives you a multitude of ways to protect the privacy of the living in your file. Included are the choices to treat tags as notes or to remove specific tags. You will find a listing of common tags here.

  • Remove means your family tree will not display entries for any living individuals. You will still need to determine how you want notes, source information, and tags to be shown for those who are not living.

. You have additional options to protect the privacy of the living, including removing notes or source information from display. If you wish, you can add a message that will be attached to each of the living individuals in your file.

Submission buttons
[View this segment of the form]

The setup/edit page has multiple functions, which are activated by the buttons at the bottom of the page. Key points are shown below, and more details are available here.


WorldConnect SetUp/Edit Form | WorldConnect FAQS
WorldConnect Main Page  | HelpDesk Main Page

Check the side panel for related links.
Still need help? Contact our HelpDesk.